|
Here you will find a complete list of gray powders available. We try our best to keep a complete selection of powders
in the 8oz size, all other sizes may have to be ordered & will take 2-3 weeks to arrive at the shop!
To Order
- Please call (902)888 2635
Hotcoat Powder Blasted SteelHot Coat Blasted Steel Powder - This polyester powder cures to produce a medium silver wrinkle finish.
Close in color to abrasive blasted steel. Cures at 400 degrees F for 20 minutes after flow out occurs (transitions from a
dry powder to a liquid look).
Hot Coat Blasted Steel 8OZ
Item
#100 11872 $8.99 + exc.
Hotcoat Powder Machine GrayAll HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote
static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. plastic bottles. RAL
7042
Hotcoat Powder Machine Gray 8 oz
Item
#100 10152 $8.99 + exc.
Hotcoat Powder Rally Wheel CharcoalAll HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote
static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. cans.
Hotcoat Powder Rally Wheel Charcoal 8 oz
Item #100 50476
$8.99 + exc.
Hotcoat Powder Dark GrayIndustrial Powder Colors - These industrial powders are widely used by manufacturers of lawn and garden, sports
equipment, and exterior furniture. These powders cure at 400 degrees F in 10 minutes after flow-out occurs in a commercial
oven or 20 minutes at 400 degrees F in a non-commercial oven. Made in the USA. RAL 7024
Hotcoat
Powder Dk Grey/Battleship 8 oz
Item #100 10308 $8.99 + exc.
Hotcoat Powder Gray PrimerPriming with Powder - The legendary durability of powder-coated finishes is
further enhanced with this epoxy
based powder primer. If the utmost corrosion
resistance and adhesion are important to you, you'll want to use this
primer
under every opaque powder we sell. (Not for use under our new line of High Temp
Powders, or directly under
translucent finishes.) For best results apply to
clean bare metal and place in a preheated 400 degree F oven until flow
out
occurs. DO NOT cure beyond flow out as adhesion will be adversely affected.
Remove from oven, cool, apply
powder of choice and bake as normal.
Hotcoat Powder Corrosion Resistant Primer -
8oz
Item #100 10301 $8.99 + exc.
Hotcoat Powder Stamped SteelAll HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote
static charge for uniform coverage and finish. All are UV and fuel resistant.
Hotcoat
Powder Stamped Steel 8 oz
Item #10099 $12.99 + exc.
Hotcoat Powder
Cast IronAll HotCoat Powders are exclusively formulated for the HotCoat
System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant.
Hotcoat Powder Cast Iron 8 oz
Item #10095
$12.99 + exc.
Hotcoat
Powder High-temp Stainless SteelAt Last! High temperature powder for
header and exhaust manifold applications! We're pleased to present this range of 4 High Temperature Exhaust System coatings
similar in color to our popular liquid high temp coatings. These high silicone content powders withstand temperatures up to
1000ºF and offer superior durability when compared to brush and spray-on coatings.
HotCoat
Powder Stainless Steel Gray Hi-Temp 8oz
Item #10326
$20.99 + exc.
Hotcoat Powder
High-temp Factory GrayAt Last! High temperature powder for header
and exhaust manifold applications! We're pleased to present this range of 4 High Temperature Exhaust System coatings similar
in color to our popular liquid high temp coatings. These high silicone content powders withstand temperatures up to 1000ºF
and offer superior durability when compared to brush and spray-on coatings.
Hotcoat
Powder Factory Gray Hi-Temp 8 oz
Item #10327 $20.99 + exc.
|
